RPA-05 is intended for use with acoustic-emission system Ranis-18, the supply voltage 28 V. The gain is selected using jumper on the board.
Amplifier is mounted inside a sealed aluminum housing that provides protection against dust and moisture according to IP65.
At the bottom of the housing the strong magnet is mounted over electrical insulator. The isolator is necessary to isolate the circuit ground from the body of the object under test. Magnet provides a clamping force up to 14kg on steel magnetic surfaces.
Gain | 34dB/46 dB (for 50 Ohm load) |
Bandwidth (-3дБ) | 8-1000 kHz |
Input impedance | 40 MOhm ║30 pF |
Output impedance | 50 Ohm |
Output range | 10 Vpp into 50 Ohm |
Noise | 0.6*<0.8 uV (shorted input, gain 46dB) at 95-300kHz |
0.7*<0.9 uV ( shorted input, gain 34dB) at 95-300kHz | |
0,75*<0,9 мкВ (at 50 Ohm input, gain 46dB) at 95-300kHz | |
0,65*<0,9 мкВ (at 330 pF input, gain 46dB) at 95-300kHz | |
Built-in filters | 4-th order Bessel LPF and HPF |
Slope | 24 dB/octave |
Power supply | 25VDC, 16* < 20 ma (no signal) |
50* < 60 ma (max. Signal, 50 Ohm load) | |
Dimensions | 63×57×34(with magnet, But without BNC) |
Mass | 240 g |
Operating temperature range | - 40°С to +70°С |
Calibration bypass | 200 V |
Input protection | Max 1A, 20us |
*- typical value